Vision problems are very prominent in today's society, with myopia being the most common. The simplest way to correct vision is to wear glasses. However, during the process of wearing glasses, various issues often arise, one of which is the bending of the temples. Although the bending does not completely damage the glasses, it still affects their normal use, making it a pity to discard them. So, what should you do if the temples of your glasses are bent? Let's take a look at the solutions below.
1. Visit an eyewear store for adjustmentBefore adjusting the glasses at a professional eyewear store, it is necessary to tighten each screw on the frame first to ensure that the adjustment can be made accurately. The adjustment should start with the lens, followed by the temples, and finally the nose pads. After the adjustment, you should try on the glasses to check the curvature and length of the temples behind your ears. It is advisable to adjust the glasses so that they do not slide down when you lower your head and gently shake them. Fine adjustments can be made based on your overall wearing experience.
2. DIY repairIf you don't want to go to an eyewear store for adjustment and the frame is not in need of replacement, you can try to repair and fine-tune it yourself. For plastic frames, a simple method is to use a hairdryer to blow hot air onto the bent area and then reshape it. For metal frames, a nylon pliers chain can be used for adjustment, but care should be taken to apply light force to avoid damaging the glasses. When using a hairdryer, move it around to prevent overheating the lenses. If the lenses are already installed, it is recommended to rinse them with water first. For metal frames with excessively large outer angles, hold one hand at the intersection of the lens and frame, and use the other hand to adjust. If using pliers, clamp less for inward adjustment and more for outward adjustment. If the glasses are too loose, bend the temples inward to make them fit more securely on your ears. Conversely, if they are too tight, bend the temples outward to make the glasses more comfortable to wear.
3. Replace with new glassesIf the frame of your glasses is severely deformed with a large deformation angle, and the adjustment process may involve breaking or welding, it is recommended to replace the glasses with new ones, especially if the cost of the glasses is not high.
